St3. Is linked to our computer

Forums Forums Qu Forums Qu troubleshooting St3. Is linked to our computer

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of Mike C Mike C 5 years, 1 month ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #83121
    Profile photo of chess

    I’m II audiotek at our church we have a line going into the S T3 to our computer and I’m not sure how to audio in the house from a CD in the computer please help

    Profile photo of SteffenR

    what are you trying to ask?

    Profile photo of garyh

    Play the CD on the computer. Make sure the volume on the PC is turned up. On your board, switch to the upper layer on the faders. PAFL/Select the ST3 channel. Set the gain level so the meter is jumping in the yellow. Bring up the fader. You should be getting sound in the PA.

    Profile photo of Mike C
    Mike C

    I think Gary answered the question that I think was being asked!

    I will add that if by chance in the source selection menu ST3 had been changed to the USB Q Drive input you will not get audio from the ST3 input jack, you will need to go to the source selection menu and select local for ST3.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.