SQ Preset Reacll from AHM

Forums › Forums › SQ Forums › SQ general discussions › SQ Preset Reacll from AHM

Tagged: , , , ,

  • This topic has 3 replies, 3 voices, and was last updated 1 year ago by Profile photo of SethSeth.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2023/12/06 at 9:50 pm #117262
    Profile photo of SethSeth
    Participant

    Is there a way to recall a preset on the SQ5 from an AHM64? Or any other external devise?

    2023/12/07 at 12:42 am #117265
    Profile photo of Mike CMike C
    Participant

    Look at using the foot swtich connection controlled with a hard contact switch.
    Maybe use a MIDI command.

    2023/12/07 at 8:49 am #117270
    Profile photo of Nicola A&HNicola A&H
    Keymaster

    AHM can send TCP strings to an IP address. Have a look at the SQ MIDI protocol here: https://www.allen-heath.com/hardware/sq/sq-5/resources/
    So for example, sending the hex string B0 00 00 C0 00 to the SQ5 IP address, TCP port 51325, will recall Scene 1 on the SQ.

    2023/12/07 at 6:09 pm #117289
    Profile photo of SethSeth
    Participant

    Oh awesome, I don’t know why I had not considered midi via TCP/IP since I have been using midi over usb already.

    Thanks to both of you!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.