SQ – Output polarity flip. (MATRIX)

[Nolan]

+1

[Dirigo]

Big +1! I always carry polarity inverting cables, but having it inside the console processing would be far superior!

[pCann]

+1

[Gregg Grey]

+1
It could be really helpful to manage small PA !!!!

[Pete Alcock]

+1. So I don’t have to use phase reverse barrels on my Thomann Achat 115m when used with other boxes (because they’re internally wired reverse-polarity!)

[Pete Alcock]

+1. So I don’t have to use phase reverse barrels on my Thomann Achat 115m when used with other boxes (because they’re internally wired reverse-polarity!)

[kub]

+1

[Joni]

+1

[Gregg Grey]

+1

[Fabrizio Roncato]

+1no news about the possibility of invert the Polarity of the Matrix?

[Vinyl]

Can we patch the sub out to a local input, then loop it back into a local output using a short XLR cable? This would allow us to access and control polarity and delay at the local stage, ensuring better signal alignment and timing.

What are your thoughts on this method?

[Mike C]

That would add extra conversion stages and have the possibility of creating an internal feedback loop.

[Author]

Posts