SQ mute button pre-fade aux behavior

Forums Forums SQ Forums SQ general discussions SQ mute button pre-fade aux behavior

Tagged: 

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of SQuser SQuser 2 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #119307
    Profile photo of Zach
    Zach
    Participant

    I’m considering an SQ and want to understand a channel’s mute button behavior on sends. Of course, the mute button stops sending the channel to the main mix and any post-fade auxes, but what about pre-fade auxes? Does it also mute for pre-fade auxes? Or are pre-fade auxes independent of the mute buttons?

    #119310
    Profile photo of Tobi
    Tobi
    Participant

    The technical datasheet seem to say, that prefade also gets muted.

    Resources

    #119326
    Profile photo of Zach
    Zach
    Participant

    It does look like pre-fade sends are also muted based on the diagram. Is someone with an SQ able to confirm?
    It would be a deal breaker for us if they don’t get muted given how we use pre-fade sends to stage monitors, so I’d like to be 100% sure. Thanks!

    #119328
    Profile photo of SQuser
    SQuser
    Participant

    Yes, I can confirm that the diagram is correct and that the pre-fader-sends muted using the mute buttons also on the SQ.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.