SQ & dLive – PreAmp Control by SQ?

Forums Forums SQ Forums SQ general discussions SQ & dLive – PreAmp Control by SQ?

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of frankle frankle 3 years, 2 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #69413
    Profile photo of frankle
    frankle
    Participant

    I’m in a situation where there is a DM48 on stage and a C3500 for FoH mix.

    Looking at using an SQ-6 side of stage for F/B, and I know that we will need a GigaACE card in the DM48, no issues there.

    What I do need to know is, can the SQ-6 have master preamp control and the C3500 have trim?

    Also, for gigs where the mixer footprint needs to be small, does the SQ-6 have preamp control as it’s listed as a supported SLink connection on the following document (the last one):
    http://www.allen-heath.com/media/SQ6_SLinkConnections_V1_1_0.pdf

    Thank-you.

    #69425
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Hi frankle,

    The SQ-6 cannot control the preamps of a dLive DM MixRack. It simply sends / receive audio to / from the dLive.

    So to answer your other question, yes, when sending audio from an SQ to a dLive, the dLive can apply independent digital trim to these inputs.

    Hope this helps.

    #69439
    Profile photo of frankle
    frankle
    Participant

    Is this something that “could” be done in the future with software updates?

    It’s quite confusing when you’ve advertised a configuration on that PDF but you can’t control preamp gain from the console.

    Thanks!

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.