Topic: sq 6 supported slink connections fw1.2.0 | Allen & Heath Digital Community

sq 6 supported slink connections fw1.2.0

This topic contains 2 replies, has 3 voices, and was last updated by KeithJ A&H 6 years, 1 month ago.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
2018/03/27 at 12:42 am #69903

jafejo
Participant

Hi friends, just for advice there’s an error in the online pdf doc for link connections. when it’s connected 2 dx168 to an sq 6.
it’s little misleading.
https://www.allen-heath.com/media/SQ6_SLinkConnections_V1_2_0.pdf

salutes !!

2018/03/27 at 12:55 am #69904

SDCyclist
Participant

What’s misleading? I mean other than all the entries in this section being labeled “SQ5” on the right side … Picturing an SQ6 in the middle… And listing I/O counts for an SQ6 on the right. Do these not work in cascade mode as expected?

2018/03/27 at 7:34 am #69909

KeithJ A&H
Moderator

Good spot!
I have updated the document.
Cheers,
Keith.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.