SQ 5 Console freezes after fail to load show library from SQ drive

Forums › Forums › SQ Forums › SQ troubleshooting › SQ 5 Console freezes after fail to load show library from SQ drive

Tagged: 

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of WaihekeSoundie WaihekeSoundie 7 months, 1 week ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • 2023/09/25 at 9:04 pm #115146
    Profile photo of WaihekeSoundie
    WaihekeSoundie
    Participant

    Hi team
    I see various threads non freezing -not sure if this is a known cause..

    My console failed to read from a memory stick with a show library and then froze when I removed the stick. The stick had not failed to read before and was only about 5% full. I powered the console down and up again and it came back up just fine (I left the memory stick inserted in the SQ drive during the power cycle and re-boot). The console was now fully operational and read and wrote to the stick just fine.

    The SQ5 is on firmware
    1.5.6 r4043

    Andy NZ

  • Author
    Posts
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.