Topic: Slink Card | Allen & Heath Digital Community

Slink Card

This topic contains 8 replies, has 7 voices, and was last updated by KeithJ A&H 5 years, 5 months ago.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
2018/05/19 at 10:18 pm #71136

Phill
Participant

I can’t see any topics on expected release.. or have I missed it … 🙂
Impatiently waiting to buy for mons…

2018/05/21 at 9:21 am #71154

SteffenR
Participant

there is no release date so far

2018/05/21 at 11:27 am #71156

KeithJ A&H
Moderator

Hi Phill,

We do not have an ETA for the SLink release at the moment, but it will require some major work under the hood in the SQ firmware.
(originally, multiple cards for different protocols were planned, but we decided a second SLink port would be much better!).
This work is due for V1.3, so unfortunately the card will not be available for a few months yet.

Thanks,
Keith.

2018/05/22 at 6:38 pm #71191

andiabwaerts
Participant

Hey keith, i hope your post doesn‘t mean that the plans for dante or waves cards arecancelled?

Thanks, andi

2018/05/23 at 9:14 am #71207

KeithJ A&H
Moderator

Hi andiabwaerts,

Not at all, the Dante and Waves cards will be released shortly!
Sorry – I should have been more clear. The ‘multiple cards for different protocols’ was referring to GigaACE/DX/dSnake/ME.

Thanks!
Keith.

2018/09/04 at 7:00 pm #78339

Stearn
Participant

Which cards are planned additionally? Waves, SLink, Dante… Madi? AES? maybe a Harddrive for recording? Maybe additional core power😁

2018/10/13 at 7:23 am #79219

Amneely7
Participant

Still waiting to hear about MADI card for SQ. Any news? Please don’t drop this card…

2018/10/30 at 9:00 am #79642

myannis
Participant

Hi. I would like to make the following setup.
SQ6 FOH with waves card.
SQ6 Monitor linked with SQ6 FOH over UTP with an additional Slink Option Card.
If i dont use my DX168 and put physical intupts on stage SQ6 can i connect ME-1 to my second Slink option Card?
Thank you!

2018/10/30 at 10:45 am #79644

KeithJ A&H
Moderator

Hi @myannis ,

I’ve responded to your direct email about this, but for anybody else looking at a similar setup:

The following is fine –

SQ (FoH) Waves Card <—> Waves server/SoundGrid network
SQ (FoH) SLink port <—> SQ (Monitor) SLink port
SQ (Monitor) SLink card —> ME-1

There is also a lot of useful information about SLink connections in the following document (https://www.allen-heath.com/media/SLinkConnections_V1_3_0.pdf).

Cheers!
Keith.
Author

Posts