Signal Generator Routing

Forums › Forums › SQ Forums › SQ general discussions › Signal Generator Routing

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of self.destructive.turnip self.destructive.turnip 4 years, 10 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2019/06/27 at 10:42 am #84874
    Profile photo of self.destructive.turnip
    self.destructive.turnip
    Participant

    Hi,

    I`m a new user of SQ5. Until this day i was using dLive S3000. I cant find in the Sig Gen tab the PAN button. I mean, how to route for example PINK NOISE only to the left or right channel of stereo bus? Is it possible?
    Thank you for responce.

    2019/06/27 at 11:35 am #84878
    Profile photo of Scott
    Scott
    Participant

    You can source an input channel from the signal generator, then use the channel’s pan control.

    2019/06/27 at 1:24 pm #84883
    Profile photo of self.destructive.turnip
    self.destructive.turnip
    Participant

    Thank You for helping!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.