Scene changes

Forums Forums Qu Forums Qu troubleshooting Scene changes

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Kemper Kemper 4 years, 11 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #56446
    Profile photo of Kemper
    Kemper
    Participant

    When I change to a new blank scene my QU starts from the last scene. I would like it to be blank. Is this a common thing or is there something I’m missing in the manual.

    #56452
    Profile photo of MarkPAman
    MarkPAman
    Participant

    Thing is, your “blank” will probably not be the same as mine. If fact I have several “blanks” or starting points, depending on what sort or show it is, if I’m using a stage box, radio mic setup, etc. I’ve just made another “blank” for QLab to playback on multiple tracks for theatre shows.

    Save your version of “blank” and start from that.

    #56453
    Profile photo of GCumbee
    GCumbee
    Participant

    Just select a blank. Store then hold down Reset Mix Settings. Now you have a blank slate.

    #56462
    Profile photo of Kemper
    Kemper
    Participant

    Thank you..

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.