Recording with the SQ6

Forums › Forums › SQ Forums › SQ general discussions › Recording with the SQ6

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of ddff_lv ddff_lv 5 years, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2018/07/22 at 7:45 pm #72875
    Profile photo of John
    John
    Participant

    Hello, I am not sure how to get a signal from my SQ6 to my MacBook. I wen in to I/O and I assigned channels, though I am lost can what to do next. I have downloaded the DAW control and I do get a signal, though I do get a signal. When I open up logic I can get my fader to see the board, I guess my question is how can I record live to my MacBook to have a multitrack recording?

    2018/07/23 at 9:26 pm #72893
    Profile photo of ddff_lv
    ddff_lv
    Participant

    There is a little icon on the left in patch window it can show either Qu-Drive or USB-B. Surprise, that icon is a button! Took me a while to figure and user manual was involved.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.