Qu24 Matrix no level

Forums Forums Qu Forums Qu troubleshooting Qu24 Matrix no level

This topic contains 5 replies, has 4 voices, and was last updated by Profile photo of Mike C Mike C 1 year, 4 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #88155
    Profile photo of Leftofcentre
    Leftofcentre
    Participant

    Trying to use the Matrix to follow LR as Delay Fill and a Press Feed for a conference but cannot get any level on the Matrix Output.

    I’ve followed the instructions in the manual and even when I select L/R on the All Matrix Sends screen; nothing. There isn’t even a level showing on the meters. Am I missing something??

    #88157
    Profile photo of SteffenR
    SteffenR
    Participant

    are your sends to the matrix are turned on?

    #88159
    Profile photo of Leftofcentre
    Leftofcentre
    Participant

    On the Matrix Sends screen? Yes

    #88165
    Profile photo of Mike C
    Mike C
    Participant

    Did you bring the L R level up on the matrix mix mixing menu?

    What board do you have?

    #88170
    Profile photo of MarkPAman
    MarkPAman
    Participant

    It’s a 24 Mike (so the title says).

    Leftofcentre – I can go through the steps from an iPad if that helps. I use a Qu-Pac, so I’m not really familiar with where things are on the desk.

    #88181
    Profile photo of Mike C
    Mike C
    Participant

    Yep right in front of me the whole time!

    Actually I find the iPad menus are easier to use then the mixer surface screen.
    I have a Qu Pac as well but have set up and use many of the full 16, 24, 32 QU’s.

    On the mixer the matrix mix levels are accessed using the function button lower
    left corner of the screen.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.