QU series AES output to USB convertor

Forums › Forums › Qu Forums › Qu general discussions › QU series AES output to USB convertor

Tagged: 

This topic contains 9 replies, has 2 voices, and was last updated by Profile photo of  Anonymous 4 years, 10 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • 2019/05/31 at 10:28 pm #84198
    Profile photo of
    Anonymous

    Is anyone using a XLR AES convertor to get 2 channels of USB to feed other equipment like an iPad etc.. ?
    If so please what are you using.

    2019/05/31 at 11:46 pm #84202
    Profile photo of SteffenR
    SteffenR
    Participant

    I’m using an ARX USB-DI and a Palmer USB DI. is that what searching?

    2019/06/01 at 12:00 am #84203
    Profile photo of
    Anonymous

    Hi there.
    No. but thanks
    Im wanting to exit from the AES from QU into a convertor unit with USB femal out to feed an iPad in my case. 2 channel USB

    2019/06/01 at 12:05 am #84204
    Profile photo of
    Anonymous

    Like this but look at the price?
    https://www.canford.co.uk/Products/95-839_YELLOWTEC-PUC2-USB-AUDIO-INTERFACE-Analogue-line-and-AES-EBU

    AES [XLR] > USB

    2019/06/01 at 12:13 am #84205
    Profile photo of
    Anonymous

    ? thats weird my post dissapeared?
    https://www.canford.co.uk/Products/2022433/95-838_YELLOWTEC-PUC2-LITE-USB-AUDIO-CONVERTER-AES3-I-O
    Just simply from the QU XLR out put AES to USB
    I wouldnt mind even if it down sampled to 16 bit….
    I can monitor the audio straight out of the iPad

    2019/06/01 at 4:51 pm #84223
    Profile photo of
    Anonymous

    Any other thoughts about using QU XLR AES output into a convertor box to get a 2 track USB feed. Either USB 2 or 3 would be fine… What do others use the AES out for? The alternative is using a small ZED desk to convert an analogue feed to USB from QU.. however it creates noise & only 16BIT.
    Any comments welcome.

    2019/06/01 at 6:06 pm #84227
    Profile photo of SteffenR
    SteffenR
    Participant

    Sorry… misunderstand you

    2019/06/01 at 9:40 pm #84234
    Profile photo of
    Anonymous

    no worries…
    I’m surprised no one else has churped in with any other idea or gadget.

    2019/06/10 at 5:41 am #84481
    Profile photo of
    Anonymous

    Thought I might kick start this again before I go buy a small mixer that only has USB 2 track output.
    I mean the price of this unit :
    https://www.canford.co.uk/Products/2022433/95-838_YELLOWTEC-PUC2-LITE-USB-AUDIO-CONVERTER-AES3-I-O
    YELLOWTEC PUC2 LITE USB AUDIO CONVERTER AES3 I/O
    is over the top for me.

    Anybody else used a different convertor box ?
    AES [main AES output from QU32 FOH 2 track output] to USB output?

    Thanks for looking
    NZdave

    2019/06/15 at 3:59 am #84606
    Profile photo of
    Anonymous

    Greetings.
    Can anyone tell me on the QU series:
    is the AES XLR is AES50 ?

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.