Qu-Pac External Control??

Forums Forums Qu Forums Qu DAW integration Qu-Pac External Control??

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Andreas Andreas 6 years, 7 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #51981
    Profile photo of higradeguy


    Can the Qu-pac be controlled from an external midi controller? I think the ipad control of the unit will be suitable for most of my situations but there are times I would like to have faders. I know Behringer is releasing the X-Touch one of these years and I was hoping to be able to use with the Qu-pac.


    Profile photo of scruffyd

    From the midi protocol document of QU-series

    The following Qu functions can be controlled via MIDI:
     Mutes
     Faders and Pan
     Mix and FX sends – Level, Pan, Assign, Pre/Post
     Matrix sends – Level, Pan, Assign, Pre/Post (not Qu-16)
     Audio Groups – Assign (not Qu-16)
     Mute Groups – Assign, Master Mute
     DCA Groups – Assign, Master Level, Master Mute
     PAFL select
     Input Channel source
     Preamp (local and dSNAKE) – Gain, Pad, 48V
     Insert In/Out
     Input Channel processing – Trim, Polarity, Gate, PEQ, Compressor, Delay
     Mix processing – PEQ, GEQ, Compressor, Delay
     Group and Matrix processing – PEQ, GEQ, Compressor, Delay (not Qu-16)
     Channel Names
     Scene Recall
     FX Tap Tempo
     MMC Transport Control

    Profile photo of Andreas

    Not sure that the X-Touch can be configured to match the Qu MIDI Protocol. I guess it can work with a DAW which can be configured to follow the X-Touch protocol, but the Qu(Pac) is not a DAW and does not allow its MIDI protocol to be adapted for some control surface needs.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.