Prefade Listening or Soloing Channels

Forums Forums Qu Forums Qu general discussions Prefade Listening or Soloing Channels

Tagged: , ,

This topic contains 5 replies, has 4 voices, and was last updated by Profile photo of magicbus magicbus 5 years, 7 months ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #73268
    Profile photo of magicbus
    magicbus
    Participant

    Can I set the mixer into a mode that will allow me to “solo” a channel? Other than the headphone mix?

    #73270
    Profile photo of Giga
    Giga
    Participant

    The same channel each time or different ones ?

    Giga

    #73271
    Profile photo of garyh
    garyh
    Participant

    You can assign PAFL to the Aux output which can feed control room monitors.

    #73273
    Profile photo of magicbus
    magicbus
    Participant

    I will look at that. Currently using Mains LR. Lots to learn.

    #73279
    Profile photo of airickess
    airickess
    Participant

    Here’s the manual. It will answer the questions you’ve been asking on the forum plus a lot more you will be asking in the future.

    https://www.allen-heath.com/media/Qu-Mixer-Reference-Guide-AP9372_10.pdf

    #73280
    Profile photo of magicbus
    magicbus
    Participant

    Thx. I’ve been digging thru the manual little by little. Likely I’m missing something obvious, Captain.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.