P/AFL Bus Permanent Inputs

Forums Forums dLive Forums dLive feature suggestions P/AFL Bus Permanent Inputs

Tagged: 

This topic contains 12 replies, has 5 voices, and was last updated by Profile photo of Netracer24 Netracer24 2 years, 11 months ago.

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • #64920
    Profile photo of Senny
    Senny
    Participant

    Right now, assigning an input (for stage director/producer/director/intercoms/talkback) into the P/AFL bus has no effect.
    I’d like to be able to hear them no matter what I hit P/AFL on.

    Is it possible to make this a feature?

    #64922
    Profile photo of SteffenR
    SteffenR
    Participant

    maybe it is switched off by default?

    #64926
    Profile photo of tor
    tor
    Participant

    External input to the PAFL bus works just fine, and is permanent.

    #64930
    Profile photo of Senny
    Senny
    Participant

    Needs to be more than one input.

    #64934
    Profile photo of tor
    tor
    Participant

    The feature is there, you just need to do it properly and not blame the console. You can just make a communication AUX, and feed it to the external input. As everyone else does on every other console.

    #64953
    Profile photo of Senny
    Senny
    Participant

    I just thought that it was a rather roundabout way of doing things since there already is a P/AFL bus.
    Going back out just to come in.

    #71621
    Profile photo of Senny
    Senny
    Participant

    Addressed in firmware 1.70.
    Much thanks, dev team.

    #71882
    Profile photo of tor
    tor
    Participant

    Huh? No. You still have only 1 external input to the PAFL.

    #71890
    Profile photo of SteffenR
    SteffenR
    Participant

    but, you can use a mix as the input

    #72210
    Profile photo of Senny
    Senny
    Participant

    Corright!

    #72655
    Profile photo of Mr.X
    Mr.X
    Participant

    How do I patch the PAFL output to an input channel in Director?

    I see MixRack Input Sockets (Local/DX/IO) for possible inputs to each channel, but I don’t see PAFL outputs as possible inputs.

    In the 1.70 video seminar, it shows that this is possible, but I can’t see how it’s done.

    #72656
    Profile photo of Mr.X
    Mr.X
    Participant

    Never mind. I see you have to do it from the PreAmp page, it’s not part of IO page for some reason…

    #73234
    Profile photo of Netracer24
    Netracer24
    Participant

    I also have a talkback aux where I feed all talkbacks from stage, Foh, coms etc. I use the external input to pafl. It works great. Alternatively, you could feed the pafl bus to a matrix and then feed the matrix to your ears. You can then feed whatever you would like to the matrix. I prefer the six so I can easily mute the coms channel when I want to hear exactly what the musicians hear. I guess you could create a mute group for that as well. The six works fine for me.

Viewing 13 posts - 1 through 13 (of 13 total)

You must be logged in to reply to this topic.