Output routing M-Waves card for recording and plugins

Forums › Forums › iLive Forums › iLive troubleshooting › Output routing M-Waves card for recording and plugins

Tagged: , , ,

Viewing 1 post (of 1 total)
  • Author
    Posts
  • 2015/10/06 at 4:16 pm #51121
    Profile photo of dcl_audiodcl_audio
    Participant

    iLive T112 with 2 iDR32s (Master and Slave) and xDR (w/M-Waves Card) in ACE Link 2

    I am trying to figure out the output routing on the iLive to send my 64 channels out of the M-Waves card, but it seems the only way to do that is to sacrifice analog output patching on my xDr and Slave iDR.

    My output routing for my Master iDR32 is happening under OUPUTS > iDR Mix Rack tab and my routing for xDr, Slave iDR and M-Waves is happening under OUTPUTS > Port B:ACE tab.

    My wiring is iLive to ACE on Master iDR. ACE card Link 1 on Master to Slave iDR. Ace card Link 2 to xDR. M-Waves lives on xDR port B.

    I’m banging my head against a wall on this one. Any advice would be greatly appreciated.

  • Author
    Posts
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.