No connection between QU-SB and AB168

Forums Forums Qu Forums Qu troubleshooting No connection between QU-SB and AB168

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of dblong514 dblong514 4 years, 1 month ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #64103
    Profile photo of dblong514
    dblong514
    Participant

    Have used QU-16 for 2 years with QU app. Works great! Just bought QU-SB and AB168 hoping to downsize and increase inputs. I can’t get the app to see that the AB168 and QU-SB connected. Yellow snake lights blinking normally. App does see a dsnake connected. Here is a screenshot of the issue … I hope I’m just missing something simple. My firmware is up to date.

    #64104
    Profile photo of dblong514
    dblong514
    Participant

    My photo wouldn’t upload. My source input screen shows channels 17-32 yellow with N/C above the channel (no connection).

    #64105
    Profile photo of Andreas
    Andreas
    Moderator

    I guess you have mapped your AB168 to channels 1-16.
    Just check I/O Patch – dSnake IN (chapter 11.15 in The Manual) to have channels 17-32 mapped to MAIN 1-16 instead EXPANDER.

    #64110
    Profile photo of dblong514
    dblong514
    Participant

    Awesome! Thanks! Didn’t realize the top horizontal region listing Main 1-16 referenced inputs 1-16 on the AB168 unit itself. I thought it was referring back to the SB. Thanks for taking the time!

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.