MixPad storing hostnames

Forums › Forums › dLive Forums › dLive feature suggestions › MixPad storing hostnames

Tagged: ,

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Dnaiel Dnaiel 3 years ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2021/02/10 at 2:22 pm #98766
    Profile photo of kjacksonmusic
    kjacksonmusic
    Participant

    on my corporate network mixpad will not auto discover my two Dlive devices, I always have to enter the hostname. it would be nice if these could be stored on the connection screen. this also causes issues if i have custom fader layouts setup and connect between the two devices the custom layouts are lost.

    2021/02/10 at 5:35 pm #98771
    Profile photo of SteffenR
    SteffenR
    Participant

    on my corporate network mixpad will not auto discover my two Dlive devices, I always have to enter the hostname

    then something in your configuration is wrong…

    2021/02/11 at 1:34 am #98786
    Profile photo of kjacksonmusic
    kjacksonmusic
    Participant

    then something in your configuration is wrong…

    Correct, but it is not something I can change for security purposes. Thus the feature request.

    2021/04/07 at 10:23 pm #100491
    Profile photo of Dnaiel
    Dnaiel
    Participant

    In my Network, auto discover from Director only works when dLive is in DHCP mode, would benefit greatly from Hostname since flood ping is bah..

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.