MIDI-Comands back to Qu-16

Forums › Forums › Qu Forums › Qu DAW integration › MIDI-Comands back to Qu-16

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Nicola A&H Nicola A&H 9 years, 4 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2014/12/10 at 3:53 pm #43732
    Profile photo of Tom
    Tom
    Participant

    I have a Qu-16 and want control my Cubase 8 with.

    The DAW-control-driver from A&H works well, but with this driver, i can only use the Faders, Sel, PAFL and Mute. No EQs, Compressors, Gates …

    I think, the Qu-16 can send AND receive MIDI.
    It´s no problem to configure the Generic Controller to control cubase with the knobs and faders on Qu. But i don’t know, which parameters are needed to send the informations back to the mixer.

    I hope someone has an idea.
    Tom

    2014/12/15 at 8:54 am #43913
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Hi Tom,

    Did you have a look at the Qu MIDI protocol?
    This should give you all the information you need.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.