ME-1 won't power up!

Forums Forums ME Forums ME troubleshooting ME-1 won't power up!

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of Underscore Underscore 8 months, 2 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #82969
    Profile photo of Barrettq
    Barrettq
    Participant

    I installed an ME-1 mixer powered by a PoE switch (along with 2 other ME-1’s) and tonight it won’t power on. A different network cable was tried along with the included power adapter. Looking from the back through the USB opening, green and yellow LED’s a visible inside, but the screen and buttons don’t light up. A hard reset was tried, but there still was no response from the screen.

    Is the mixer dead? Anything else to try besides filing for a warranty replacement? It’s troubling that it failed after just 2 days of use.

    #82973
    Profile photo of Underscore
    Underscore
    Participant

    How old is the mixer, there seems to be a rash of them having this power up issue lately. I seem to recall the discussion focusing on an internal board issue/problem.

    #82976
    Profile photo of Barrettq
    Barrettq
    Participant

    The unit is brand new – just out of the box this past Friday.

    #82983
    Profile photo of Underscore
    Underscore
    Participant

    Then I’d be getting an RMA and returning it. Nothing you can do with it.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.