Local vs Exp input not showing Gain level

Forums Forums GLD Forums GLD general discussions Local vs Exp input not showing Gain level

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Chris93 Chris93 6 years, 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #39400
    Profile photo of GSLC-Tech
    GSLC-Tech
    Participant

    We are using the tape output from a Mackie mixer into the RCA connector (socket 45/56) of our GLD 112. When we select the channel then Processing -> Preamp, I don’t see the Gain level shown (just trim). Why would there be a difference between a local input vs Exp input?

    I really like the feature of seeing small adjustments to the Gain.

    #39401
    Profile photo of Chris93
    Chris93
    Participant

    There is no gain, there is no preamp. It’s a (consumer level) line level input so there is no need for a preamp, given that the job of a preamp on a mic input is to boost signals up to line level.

    It’s not because it’s a local input, the XLR inputs on the back have preamps on them, and you can adjust the gain of those.

    Chris

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.