how to record with USB a pre-EQ signal?

Forums › Forums › GLD Forums › GLD general discussions › how to record with USB a pre-EQ signal?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2014/08/23 at 3:03 pm #41418
    Profile photo of byondobyondo
    Participant

    I need a simple method to bypass any eq, parametric or graphic, in the usb recording.
    It seems impossible, the only method I have found is: use a fx slot,make it “empty”, insert it on the mainLR (tha channel I want to record) and then on “REC” matrix (obviously put the “mainLR” send to -inf) use external input and point it to “FX slot” out “PO12”.
    It’s not that immediate and, most important, I loose an FX slot, but it works and I cannot find any other way to do it, without remapping outputs or ad-hoc groups/auxes.
    Any other suggestion?

    Massimo

    2014/08/23 at 4:34 pm #41424
    Profile photo of Chris93Chris93
    Participant

    Take the EQ off your LR mix and send LR to a stereo matrix. Do your system EQ on the Matrix, send that to the PA, and record the LR directly.

    Chris

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.