Having a "mix" follow the L-R

Forums › Forums › Qu Forums › Qu general discussions › Having a "mix" follow the L-R

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Mike C Mike C 1 year, 2 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2023/02/12 at 12:50 am #111448
    Profile photo of Bob
    Bob
    Participant

    Hello all. I am the front man in a three piece. I run the sound as I am performing. I would like my monitor mix in front of me to be exactly what is going out the mains so that I hear what the audience is hearing. I also still want my monitor on its own mix send so I can control its volume separate from the mains. How do I do this?

    2023/02/13 at 12:33 pm #111484
    Profile photo of Mike C
    Mike C
    Participant

    You could set a mix to be post fade and set the fader sends to all the same level. If you have a matrix mix available assign the LR main to the matrix and the matrix out for your mix, assigned all the needed channels to a group, unassigned that group from the mainLR mix and use the group out.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.