FX instructions

Forums Forums Qu Forums Qu troubleshooting FX instructions

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of MartinW MartinW 7 years, 6 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #37292
    Profile photo of Michael
    Michael
    Participant

    Newbie. I followed the instructions in the manual but FX still don´t work. Is there any good instructions to learn how to use FX?
    Please help me.

    Michael

    #37295
    Profile photo of GCumbee
    GCumbee
    Participant

    I am not at a mixer but basically. Go to layer 3. Make sure all but first 3 faders are up to 0. Go back to layer 1. Turn mic 1 up till you have sound. Press FX1 on right side. All faders should go down. Bring fader 1 up. You should have something like reverb if that is on fx1. Check back panel settings on FX page for that effect. Make sure set to fx1 and not a mix buss. That should work.

    #37302
    Profile photo of MarkPAman
    MarkPAman
    Participant

    Just to clarify – by “layer 3”, GCumbee means the upper layer button, and “layer 1” is the lower button.

    #37305
    Profile photo of MartinW
    MartinW
    Participant

    The thing that’s missing from the ‘how to set FX’ is that you have to set the level of FX return. It’s at infinity by default, ie nothing in the mix.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.