Fine tuning of the aux feed with rotary to get a perfect 0dB value.

Forums › Forums › Avantis Forums › Avantis feature suggestions › Fine tuning of the aux feed with rotary to get a perfect 0dB value.

Tagged: 

Viewing 1 post (of 1 total)
  • Author
    Posts
  • 2023/01/31 at 7:41 pm #111228
    Profile photo of Tatsuya NakamuraTatsuya Nakamura
    Participant

    When using the rotary encoder on top of the fader, when sending a feed to aux from not sending at all, the next value of +0.4dB is -0.1dB, and the 0dB value cannot be set and is skipped.
    Is there any way to set it to 0dB using a rotary encoder?

    Note that a feed rate of -3dB exactly was possible.

    Attachments:
    You must be logged in to view attached files.
  • Author
    Posts
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.