Filtre in Aux Buses

Forums › Forums › dLive Forums › dLive General Discussions › Filtre in Aux Buses

Tagged: , ,

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2024/11/12 at 6:26 pm #127229
    Profile photo of zennrozennro
    Participant

    Hi,
    Do you know a possibility to set a filter in an Aux Bus ? (in this case for a Sub, at 80Hz). The Filter in the PEQ for Aux Buses is not going under 2kHz.
    Thanks !

    2024/11/12 at 7:28 pm #127230
    Profile photo of BrianBrian
    Participant

    It may be that the PEQ filters have been set to “limited” range instead of “full range”. You need to hold down the “Setup” button while on the PEQ screen and then touch on the PEQ screen to bring up the settings page.

    2024/11/12 at 10:56 pm #127235
    Profile photo of zennrozennro
    Participant

    Hi Brian, Thanks for the tipp !!
    Best,
    R

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.