Effects in ME-1

Forums Forums ME Forums ME general discussions Effects in ME-1

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Penman53 Penman53 7 years, 5 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #37871
    Profile photo of Penman53
    Penman53
    Participant

    Hi all. Just hooked up a new system with Qu-16 mixer, AR2412 digital snake and two ME-1s. Everything came together pretty well but I’m stuck with one item. Can the reverb and delay effects on the Qu-16 be patched through to the ME-1? I tried setting a couple of ME-1 buttons to 27 and 28 (effects return) but the delay was thin and very different from the FOH sound. Just wondering what I might be doing wrong. Thx in advance.

    #37872
    Profile photo of GCumbee
    GCumbee
    Participant

    I set up a ST3 playback. Set 1,2 on ME 1 for 21,22.
    Set Key 9 for Group with 27,28. Seemed a bit thin but if went to
    the FX2 with 2Tap delay. It defaults the filter about 150. Lower that if you want a fuller sounding delay. That will affect the FOH. Sounds much better. I set key 16 for group with 25,26 for Fx1 with verb. It sounded fine as I had verb set.

    Hope that helps.

    #37882
    Profile photo of Penman53
    Penman53
    Participant

    Thanks GC! Heading down to try it right now.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.