Does the A+H QU-32 board autromatically update the Software and Firmware?

Forums › Forums › Qu Forums › Qu general discussions › Does the A+H QU-32 board autromatically update the Software and Firmware?

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of webe123 webe123 3 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2024/01/30 at 7:19 pm #118949
    Profile photo of webe123
    webe123
    Participant

    Does the A+H QU-32 automatically update the firmware and software if it is hooked up to the inteernet? Or do both have to be manually downloaded and put on?

    2024/01/30 at 10:33 pm #118958
    Profile photo of Mike C
    Mike C
    Participant

    The update needs to be done manually using the USB drive.
    Format the drive in the mixer, go to your computer, download the update, extract the file
    and copy it to root directory of the USB. The utility menu on the QU has the firmware update menu.

    2024/01/31 at 1:56 am #118960
    Profile photo of webe123
    webe123
    Participant

    So, you CANNOT update the firmware or software automatically? This is what I thought also….I was just asking because our soundguy said it updated automatically……I did not think that was right…thanks for clarifying this.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.