Dlive C1500 Stand-Alone

Forums › Forums › dLive Forums › dLive General Discussions › Dlive C1500 Stand-Alone

Tagged: 

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2018/12/03 at 5:36 pm #80520
    Profile photo of Dub_DaddyDub_Daddy
    Participant

    Is it possible no work with only the surface on the C1500? exempel, you just need 4 inputs on the backside?

    Best regards / Thomas

    2018/12/03 at 9:04 pm #80527
    Profile photo of ArtArt
    Participant

    No. The processing is done in the mixrack, not the console. The console is simply a control surface.

    2018/12/04 at 2:51 pm #80549
    Profile photo of Dub_DaddyDub_Daddy
    Participant

    Thanx for info. But can it work only with Allen & Heath DX168/X and C1500, or you need Mixrack?

    / t

    2018/12/04 at 3:00 pm #80550
    Profile photo of RSRS
    Participant

    As Art stated, all the processing is in the mixracks only! DX units are for additional inputs only, they are no mixrack….

    2018/12/04 at 3:00 pm #80551
    Profile photo of BILDICBILDIC
    Participant

    you need mixrack

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.