Decksaver Pro Cover for Allen & Heath QU 16 Digital Mixer

[Mike M]

Has anyone used one of the above as a deterrent?
Pros/Cons

I usually leave my QU-16 at the stage and mix by iPad
and
once in a while I’ll get a “yahoo” messing with the faders…

Mike

[Mike C]

You could set a password for the mixer and only log in with the iPad.
doing that would keep the surface of the mixer locked out.

The hardcover would keep the mixer protected.

A QU SB or QU Pac would work as well and take up less space.

[JimmyB]

I thought about one of those, but I wonder if it would cause heat problems.

[Mike C]

I thought about one of those, but I wonder if it would cause heat problems.

I doesn’t cover over the sides so there would still be cross flow ventilation below and with the back vents. With a hard cover I could see where there could be a slight increase in heat since the surface could not radiate heat off of it as well, doubt it would be a
problem.

[MarkPAman]

I know somebody that uses one on his Qu32 regularly, and he’s not had a problem.

[airickess]

Coming a bit late to this thread, but I have used a Decksaver cover for my Qu16 for years now and found it to be a great investment. It not only protects the surface when walking away during a gig but it also protects the surface during any transport and storage. The Qu soft cover for the Qu16 will fit right over the console and Decksaver, giving a perfect combination for transportint the console. I’ve not yet bent a fader or lost a knob when using the Decksaver.

[Author]

Posts