Dante Issue

Forums Forums SQ Forums SQ general discussions Dante Issue

This topic contains 16 replies, has 8 voices, and was last updated by Profile photo of Brian Brian 3 months, 3 weeks ago.

Viewing 2 posts - 16 through 17 (of 17 total)
  • Author
  • #119031
    Profile photo of Søren Steinmetz
    Søren Steinmetz

    That is correct, the “patchbay” way will be using Tie-Lines.

    Profile photo of Brian

    You need to use the I/O card’s routing menu/tab in the console to set this up. You can use tie-lines, but you are not limited to only sending tie-lines to the I/O card.

Viewing 2 posts - 16 through 17 (of 17 total)

You must be logged in to reply to this topic.