Controlling iLive mutes from a PL-8 contact closure input, toggle or momentary?

Forums Forums iLive Forums iLive general discussions Controlling iLive mutes from a PL-8 contact closure input, toggle or momentary?

Tagged: 

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of Mitchell Mitchell 4 years, 9 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #60862
    Profile photo of Mitchell
    Mitchell
    Participant

    We have an iLive-iDR-32 system with R72 surface and PL-10 remotes. We’d now like to make building announcements through this system, so would like a contact closure input to unmute a microphone input, and we look forward to using the PL-8 for this.

    I know that when configured for mutes, the push-buttons on the PL-10 toggle the mute. But for this PL-8 application we’d need the PL-8’s contact closure inputs to be momentary, so the iLive input is only unmuted momentarily while the contact is closed (or open, whichever is needed) rather than toggled with each contact closure.

    So my question is, when a PL-8 is configured so that a contact closure input controls an iLive input mute, is the mute toggled or momentary with each contact closure.

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.