Ar2412 with AB168

Forums Forums SQ Forums SQ troubleshooting Ar2412 with AB168

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of KeithJ A&H KeithJ A&H 2 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #112190
    Profile photo of Themann
    Themann
    Participant

    Hi,
    I just get an extra AB168 to go with my AR2412 on the console patch I can acces all the 20 outputs but only the first 32 inputs are avalable, I can not figure out how to acc├Ęs all the 40 remote input. According to what a read, the 40 inputs should be avalable. What can be the cause for this sitiation?

    Thank you

    #112193
    Profile photo of KeithJ A&H
    KeithJ A&H
    Moderator

    @themann

    On the SQ I/O screen, SLink and I/O Port tabs are split into 4×32.
    There are 4 dots under the text in each tab to show whether you’re viewing sockets 1-32, 33-64, 65-96 or 97-128.
    To cycle through these, just touch the tab multiple times.

    This is described in the reference guide here – https://www.allen-heath.com/media/SQ_ReferenceGuide_V1_5_0.pdf#page=20&zoom=auto,-361,553

    Hope this helps!
    Keith.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.