Adding External Microphone profiles

Forums › Forums › SQ Forums › SQ general discussions › Adding External Microphone profiles

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Mike C Mike C 2 years, 8 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2021/08/20 at 6:33 pm #103011
    Profile photo of Eric
    Eric
    Participant

    I have been trying to find out if you can add load microphone profiles into the SQ-6 like you can the QU series. I would like to match my channels to the mics since most of my folks do not understand how to adjust the profiles.

    2021/08/20 at 8:11 pm #103013
    Profile photo of NickBC
    NickBC
    Participant

    Hello Eric,

    So far they only have the Audix Pre-sets for SQ. Guess it will be a while before the pre-sets are available for the others like QU.
    Here’s the link…. https://www.allen-heath.com/profactory-presets/

    2021/08/21 at 12:13 am #103017
    Profile photo of Mike C
    Mike C
    Participant

    You can make your own and save them in the pre set library to be re-called.
    May be better to do that anyway since a generic preset does not take into account your system that the mics are actually used in.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.