AB168 on expansion port?

Forums Forums GLD Forums GLD general discussions AB168 on expansion port?

This topic contains 4 replies, has 4 voices, and was last updated by Profile photo of Keith Keith 6 months, 1 week ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #81710
    Profile photo of retroj
    retroj
    Participant

    Hello. I have a GLD-80 with an AR2412 connected to its dSnake port. If I want to add an AB168, can I connect that to the GLD’s expansion port, or does it have to go on the AR2412’s expansion port? Thank you.

    #81711
    Profile photo of Jeff
    Jeff
    Participant

    No, you can only use the AR84 in the Surface Expansion port as it only allows for 8 inputs and 4 outputs.
    Now, could you plug it in and use 8 of the 16 inputs and 4 of the 8 outputs? That, I don’t know.

    Jeff

    #81712
    Profile photo of retroj
    retroj
    Participant

    Thank you

    #81713
    Profile photo of GSLC-Tech
    GSLC-Tech
    Participant

    We use 2 8×4’s which should give what you need. Note, we are using a gld112

    #81802
    Profile photo of Keith
    Keith
    Participant

    The 16/8 works great connected to the expansion port on the 24/12. All 40 channels work with no drop outs. We use the 16/8 as a drop snake by the drums and for stage Left

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.