one channel freezes for 10 seconds

Forums › Forums › iLive Forums › Archived iLive Discussions › one channel freezes for 10 seconds

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Rexeltw Rexeltw 11 years, 2 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2013/02/03 at 2:22 am #23577
    Profile photo of Berry-Lavrijsen
    Berry-Lavrijsen
    Participant

    Hello,

    Today we had a problem with one channel on the Ilive.
    One channel frooze for 10 seconds, and then it came back.
    All other channels worked normal, and the channel that frooze worked normal on the stage monitors during the problem.
    The metering of that channel frooze, and it didn’t pass audio for 10 seconds.

    The output’s for the monitors are set post preamp.

    Did someone had this problem before?

    Regards Berry

    2013/02/04 at 9:08 am #32963
    Profile photo of Rexeltw
    Rexeltw
    Participant

    Have you checked the event log? Sometimes if you have a dodgy cable the result can be drop outs on the control surface.

    Just remember kids no matter how good your mixing is you can’t polish a turd…

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

The forum ‘Archived iLive Discussions’ is closed to new topics and replies.