long startup time

Forums Forums GLD Forums Archived GLD Discussions long startup time

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Nicola A&H Nicola A&H 8 years, 10 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #23260
    Profile photo of steveILS
    steveILS
    Participant

    My company has recently sold 3 GLD 80 consoles and everyone’s pretty happy so far. However, the other day I noticed that one of the consoles as a very long startup time, 1-2 minutes vs the 10 seconds it takes for the other boards to boot. On all three boards I get a quick view of linux, some distorted looking color bars, and then two of the boards immediately start up. The third one hangs at a black screen with a cursor for a minute or two and then starts up. Firmware I believe is 1.02 on all three. I definitely updated the board with the error myself. Is this a known problem? What’s happening here?

    #31181
    Profile photo of Nicola A&H
    Nicola A&H
    Keymaster

    Check that DHCP is not enabled in Setup/Config, Network tab.
    If DHCP is enabled and no DHCP server is active on the network, you might experience a long boot-up time.
    If the problem still occurs please contact Tech Support through this page http://www.allen-heath.com/uk/support/Pages/support.aspx.

    I hope this helps,

    Nicola
    A&H

Viewing 2 posts - 1 through 2 (of 2 total)

The forum ‘Archived GLD Discussions’ is closed to new topics and replies.