PAFL Wedge causing echo in Aux mix channel

Forums › Forums › iLive Forums › Archived iLive Discussions › PAFL Wedge causing echo in Aux mix channel

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2011/05/11 at 1:16 am #22771
    Profile photo of kentlowtkentlowt
    Participant

    I have had this issue through a few versions of firmware. I have nothing routed to the wedge but, as long as it is unmuted a slap back type echo happens to my stereo Aux 2 mix which just happens to be my drum monitor mix :S. I have been through all of the routing and I can’t see anything that would cause this but, it might be something I haven’t considered so I thought I would ask to see if someone has any ideas of how this is happening before I bother support.

    112T/IDR48/IDR16

    2011/05/11 at 10:51 am #28200
    Profile photo of StealthStealth
    Moderator

    Hi Kent

    Where have you got your talkback feed assigned to? could this be the issue?

    You could also try recalling a factory show to see if this fixes the issue?

    Regards
    Sam A&H

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.