Matrix Sends

Forums › Forums › iLive Forums › Archived iLive Discussions › Matrix Sends

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2011/04/26 at 4:16 am #22746
    Profile photo of ztemplinztemplin
    Participant

    Is there anyway to make the matrix sends pre processing from the main L+R sends. I dont want the main EQ going to my fill speakers.

    2011/04/26 at 7:49 am #28086
    Profile photo of Anonymous
    Inactive

    Hey
    You can doit this way:
    1. Create 2 matrix groups – one to main L-R, second to the outfill
    2. Leave the EQ on main L-R and add EQ on matrix only ;)
    Its works great ;)
    Bonus: You can record the show from L-R without EQ :)

    Mario from Poland

    2011/04/26 at 7:31 pm #28083
    Profile photo of ztemplinztemplin
    Participant

    I would do it that way, but the board processing is all i got for my L+R mains so not really an option. Not really sure why the matrix are post processing to begin with, i cant see that being beneficial in any way really.

    2011/04/26 at 9:42 pm #28084
    Profile photo of StixStix
    Participant

    quote:

    Originally posted by ztemplin

    I would do it that way, but the board processing is all i got for my L+R mains

    just use the Matrix processing for your main outputs instead. If you just think of your main L/R as a subgroup that feeds all other matrix outputs then set up as many matrix’s as you need. I normally have a matrix for mains, front fill, record, delays etc. Don’t put processing on the L/R buss and you can then bury it in a layer as you don’t need to access it.

    Cheers

    Richard Howey
    Audio Dynamite Ltd
    IDR48/IDR16/T112/R72/Mixpad

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.