Incorrect Type in GetLEDColourForType

Forums Forums iLive Forums Archived iLive Discussions Incorrect Type in GetLEDColourForType

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #22151
    Profile photo of timtracetimtrace
    Participant

    Greetings,

    I’m getting nasty pop-ups while running iLiveEditor v1.51 in offline mode.

    ah1.jpg

    Reproduceable steps:
    Load Editor
    Recall my show
    No pop-ups appear
    Recall FOH_LCR__ show template
    Recall my show
    Four or five pop-ups appear
    Several of my custom strips have dissapeared from each tab.
    (The problem also occurs if I delete the custom strips and tabs and rearchive the show.)
    Rinse, repeat.

    Thoughts?

    Thanks,

    Tim ==

    #24741
    Profile photo of colinsocolinso
    Participant

    Hi Tim,
    I’ve received a copy of your show and have reproduced your problem here.
    The pop up messages you’re receiving aren’t critical, and once you’ve pressed ok on them your equipment will continue to work correctly. We’ll work on a fix of this for the next version.

    As for the custom strips, these aren’t currently stored in shows, so when you recall the FOH_LCR__ show you’ll lose any channel strips for channels which aren’t in the new mix config.

    I hope this helps?

    Colin A&H

    #24760
    Profile photo of timtracetimtrace
    Participant

    Thanks, Colin. Good to know those messages are benign.

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Archived iLive Discussions’ is closed to new topics and replies.