Forum Replies Created
-
AuthorPosts
-
2024/03/31 at 12:40 am #120951
.
2024/03/27 at 2:48 pm #120813it goes to the mtx1(L) mtx2(R) outputs and from there xlr to the audio interface
2024/03/27 at 9:41 am #120790To get stereo sound
2024/03/26 at 3:26 pm #120758Listening to the broadcast, I don’t always understand what the problem is. Sometimes I think it’s distortion, sometimes it’s an EQ problem. You also helped me by telling me about the phase. I have several controls: mix gain in the matrix, the matrix fader itself, gain on the audio interface and in OBS. Sometimes I don’t know where to turn best. It would be cool to fix the sound while staying on the matrix. Perhaps it’s really all because of the synthesizer, but there are no problems in the hall. I don’t know whether it’s worth switching to mono channel output or not
2024/03/26 at 3:20 pm #120756In theory, the broadcast track should be stereo. After all, this is a matrix that receives PA and goes through this splitter, below is the picture (in case it doesn’t work that way). Now the idea has arisen to sacrifice stereo sound and take a mono-channel mix in order to build the level of instruments. I think many people watch the broadcast simply through their phone and they don’t really need stereo sound, but better quality, but mono
Attachments:
You must be logged in to view attached files.2024/03/26 at 2:22 pm #120753And about phase suppression, what do you mean, is it possible to reverse the phase on a channel?
2024/03/26 at 2:18 pm #120752We have the following situation: The mixer is on stage, there is no way to move it towards the computer or vice versa. The computer is occupied by a person who displays text on the screen. What are some ways to get a good mix on broadcast? We have an LR with nothing wired to it. I took it and took MTX1-2 for broadcasting, it goes to the esi u22xt audio interface, and I took MTX3-4 for the hall (I cut out the resonant frequencies there). I made it so that each output had an independent equalizer and compressor. Would it be better if I use Mix1 (all stereo mixes are occupied, only mono remains) and there I slightly reduce the synthesizer level, for example? I feel overdriven when the synth plays. And I don’t know how best to fix it, because in the hall it sounds good and there are no problems. Please give me advice
2024/03/26 at 11:36 am #120746To receive sound for broadcasting. I’m using MTX1-2 which accepts LR. But the sound is very bad. I don’t know the best way to fix this, do you have any tips? Perhaps other ways? It is very important for me. They said it was possible via USB, so I asked you here.
3:40 / 18:30
2024/01/07 at 10:44 pm #118167I heard about some “Alt out”. What it is? How do people stream in general? How?
2024/01/07 at 7:39 pm #118158It is desirable that the sound be stereo. And if you take LR into the matrix, then the music that goes into the hall will end up on YouTube, this option is not suitable
2023/11/24 at 3:05 pm #116918??
2023/11/21 at 1:30 pm #116806P.s. I would also like to hear with and without effect
2023/11/20 at 6:32 pm #116771Thank you very much! You helped me with my question. Have a nice day 🙂
2023/11/20 at 6:13 pm #116767If my DCA is initially set to maximum and I add channels there, then I won’t be able to make it louder, because there’s nowhere to go higher? and therefore it is better to initially set DCA to 0 so that you can make the volume higher and lower. Did I understand correctly?
-
AuthorPosts