[USAParticipant]

V1.5 for what I saw included:

DCA Groups (4 assignable DCA’s for the QU-16 and 24)
Channel Naming (Follows IPad and iPad Follows names)
Support for new AB168 box
Assignable output patching (when using a DSnake Box) you can route signal to any output!
USB recording source selection
Midi Machine control (transport control)
DAW Bank Control from soft keys (will be great for the QU16 guys)

[USAParticipant]

The RTA is fed off the PFL Buss, so if you have your gain structure set to a good level, this should not be an issue. Just remember that the default for the RTA / PAFL is

Pre Fader on the inputs and Post Fader on the outputs, so if your output faders are pulled down, your RTA level will look low.

Hope this helps

[USAParticipant]

You can assign anything to the Monitor Output port.

Why not just assign the Talk back mic to an Aux? Then have one of the 40 sources being selected in the ME-1 as an Aux input and you have Talk to the ME-1s at that point.. When you press the Talk button on the console it would route to the ME’s

My guess is if you are using ME’s you probably dont need as many aux’s live in the mix so you could assign different Aux’s to the groups of ME-1’s or just have all ME=1s have a default access key to pick up TB.

Will that work of for you?

[Author]

Posts