Forum Replies Created
Viewing 8 posts - 1 through 8 (of 8 total)
Viewing 8 posts - 1 through 8 (of 8 total)
Ok, i had to set the channel 31/32 to stereo linked, that worked ! Sorry, thread could be closed.
I still have a problem, when i use WDM Audio i have 3 Audio Outs available, if i select Nr. 2 I could acutally hear the test, but its only in mono. What do i need to change to make it stereo?
This request can be closed, it actually worked.
Yes, what means DEEP processing ? Does it involve buying plugins ?
5. Is there any chance, that we can get a midi clockable looper, with configurable length and ADSR? ? That would make the console perfect for live electronic shows, where you record your performance to a loop – rearrange your patterns, and move back to your live performance.
For the record ! I did buy a USB 3 PCIE express card. Ok – it was only 25 bucks. I hoped that i would have a exclusive USB card /port solution to get lower latency. (Because other USB ports are used for Keyboard, Mouse, NI Maschine, USB Midi controllers and so on.)
Guess what – the Qu Pac does not work with this pci express card.
The card is a fresno logic card.
Should have bought this one:
As i have still usb 2.0 ports on my pc, i will move the current devices that does not stream audo to the new usb 3.0, and give the usb 2.0 exclusive to the qu pac.
But its nevertheless annoying 🙁 The usb 3.0 should be correctly backward compatible.
Ok, i got it sorted – its in the manual :/ But i got some nice person in a different forum who gave me the needed insight. I needed to adjust the direct out trim – and the direct out on the routing page could be set to post EQ or post compressor.
This is from the same take, but track 18 which is the main output, right side (mono)
I actually check the recorded WAV file, and the overall loudness seems to be fine for the main out recording (-6 db) , but the file which records only the kick has a db of like seems to have very low volume.