Qu Pac: WDM Audio

Forums › Forums › Qu Forums › Qu general discussions › Qu Pac: WDM Audio

This topic contains 3 replies, has 1 voice, and was last updated by Profile photo of Sternenlicht Sternenlicht 6 years, 5 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2017/11/19 at 4:02 pm #66370
    Profile photo of Sternenlicht
    Sternenlicht
    Participant

    I want to use my Qu Pac with Sonarworks Microphone to measure my room, the sonarworks plugin seems to use the WDM Driver function. I Have inserted the microfone in port 15, and patched it via I/O Patch to “slot 1” (slot 2) but i am unable to hear anything from my microphone. (I could see of course the level of the microphone) , but in windows there is no level displayed.

    2017/11/19 at 4:21 pm #66371
    Profile photo of Sternenlicht
    Sternenlicht
    Participant

    This request can be closed, it actually worked.

    2017/11/19 at 5:26 pm #66373
    Profile photo of Sternenlicht
    Sternenlicht
    Participant

    I still have a problem, when i use WDM Audio i have 3 Audio Outs available, if i select Nr. 2 I could acutally hear the test, but its only in mono. What do i need to change to make it stereo?

    2017/11/19 at 7:18 pm #66377
    Profile photo of Sternenlicht
    Sternenlicht
    Participant

    Ok, i had to set the channel 31/32 to stereo linked, that worked ! Sorry, thread could be closed.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.