Just seen this reply. Yes that’s what I am looking to do, I can use mic input into clarett or into zedi 10.in any case these processed vocals should route via USB channels 1+2 or 3+4 into the zedi 10. Most likely from 1+2 leaving 3+4 free. This signal from usb is hard wired into ST2 in the zedi I am told… The signals from this and from the Windows laptop with backing tracks going into St1 would be mixed and would be routed back to the Mac via USB ch3+4 by choosing the option M1,M2, L,R. I am told from Allen and heath that routing the input 1+2 or3+4 has to be done in logic and I have found this… However when I choose to send M1,2 ,L,R and choose zedi 10 as logic input.. it only recognises the mic in ch1 and seems to disregard the other 3 channels. Connection from laptop to zedi is a jack from headphones out going into 2 1/4 inch TRS..into St1 in zedi. also FB live gives an option of choosing input and when choosing zedi 10 again only ch1 is recognised. I havnt tried the headphone thing though monitoring in zedi is usually ok. I posted a response from a&h above. Have only tried one of their options so far. Will try more shortly
