Used three Onemix apps last night on stage and it worked great. Much better for monitor mixing. Used 1 iPad1 iOS5, 1 iPad2 w/iOS6 and 1 iPad3 w/iOS6. They all worked great.
I have the system set up as L-R-Sub for the main outputs. Pretty simple. Of course it adds the sub send on the channels. The problem seems to be that if I use the sub send on the channels it also sends signal back into the mains output. My question is what’s the point of having the individual sends. I can do this without them. The only advantage is it gives me a control over my sub output but why the channel send pot.
I must be missing something and have found no detailed info on the website or in the help menu in the editor.
Yes I agree that the aux would give me a pre send. I just tested and the channel sub send does nothing. Channel fader goes to L/R/sub which makes sense but why the channel sub control does nothing is beyond me. Up or down makes no change in the level to the sub master fader.
That’s exactly how I do it and it sends signal back into the main l/r outputs. I haven’t checked it since I upgraded to firmware but when I turn up the channel sub volume, it also comes up in the main outputs. Very strange.
