ZED 24 send/return question

Forums Forums Other A&H products ZED 24 send/return question

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of Earlsfield Earlsfield 3 weeks, 3 days ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #108713
    Profile photo of Earlsfield
    Earlsfield
    Participant

    I might have missunderstood the manual, so please help:
    I am trying to add a stereo effect module to Stereo track 3, and then send any tracks to aux 3 so the signal would be processed. However, when i send two channels into Aux 3, I only hear one (left) channel comming out of the aux. I had stereo to two mono jacks cable patched into aux 3, connected to left/right of the effect module. Am I assuming aux 3 is stereo, while it is actually mono?

    #108714
    Profile photo of Earlsfield
    Earlsfield
    Participant

    I realise now that auxes are mono. So if i want to send stereo info to the effect, I will need to use both aux 3 and 4, correct?

    #108716
    Profile photo of Mike C
    Mike C
    Participant

    Yes the auxes are all mono balanced line, your “stereo” break put cable
    was was only giving you the + and – of the balanced line output.

    To send stereo into an FX unit you would need to use to post fade auxes.

    With my analog boards I always sent mono to FX units but returned them
    in stereo to the board.

    #108846
    Profile photo of Earlsfield
    Earlsfield
    Participant

    Cheers!
    Yeah IDK why I thought aux would be stereo. lol. I have a binaural synth and wanted to pay around with sides from return, thats why i did it like so. hanks again.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.