SQ stereo links

Forums Forums SQ Forums SQ feature suggestions SQ stereo links

Tagged: , ,

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of SteffenR SteffenR 5 years ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #83691
    Profile photo of Stearn

    SQ doesn’t save Stereo Routing (Pairing) of channels/mixes in a scene. It’s a little bit annoying that you have to set up which channels or mixes are together/stereo manually every time you load a scene.

    Thanks for improving!

    Profile photo of pfrigge

    Hi, if I remember correctly they decided to save the mono/stereo channel configuration only in the show file (not the scene file) because changing the mono/stereo configuration results inevitable in an interruption of the audio. In some situations/environments you need to be able to load a scene while there is still audio going through the console.
    That’s why some people already asked for a linking/ganging feature so that you can use two linked mono channels for a stereo signal.

    Profile photo of SteffenR

    to link two channels as a stereo, leads to a configuration change inside the FPGA

    this is saved in the showfile

    but it is possible to reconfigure ins and outs to stereo channels in a scene based way

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.