Splitting input L/R from external device?

Forums Forums Qu Forums Qu general discussions Splitting input L/R from external device?

This topic contains 3 replies, has 4 voices, and was last updated by Profile photo of Andreas Andreas 4 years, 11 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #57083
    Profile photo of progmr
    progmr
    Participant

    I’m wondering if it is possible to split the L/R of an external device (e.g. MP3 Player) such that a click track is on R and only goes to the monitors and the R is a backing track that can go to the mains.

    #57084
    Profile photo of Chris93
    Chris93
    Participant

    You could plug it into two separate mono channels..

    Chris

    #57085
    Profile photo of DoctorG
    DoctorG
    Participant

    Just obtain a 1/8-inch stereo plug to 2 quarter-inch plugs and connect the player to two mono channels, as Chris suggested.

    #57086
    Profile photo of Andreas
    Andreas
    Moderator

    …and cross fingers that channel separation is good enough to not hear the click on mains.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.